Filter
Top Products
2
Task 6: Unpack, Inspect, and Install the Management Server
2-23
Installation Tasks
Install the management server in the equipment cabinet. Refer
to the 1U Server Rack-Mount Kit Installation Instructions
(958-000310) for guidance.
5. Connect the management server to the customer-supplied
Ethernet
LAN segment or McDATA-supplied Ethernet hub (private LAN
interface). To connect the management server:
a. As shown in Figure 2-11 on page 2-23, connect one end of the
Ethernet patch cable (supplied with the management server)
to the right RJ-45 adapter (LAN 2) at the rear of the server.
Figure 2-11 1U Management Server Connections
b. Connect the remaining end of the Ethernet cable to the LAN as
follows:
• If the management server is installed on a
customer-supplied LAN segment, connect the cable to the
LAN as directed by the customer’s network administrator.
• If the management server is installed on the
McDATA-supplied Ethernet hub, connect the cable to any
available hub port.
6. If required, connect the management server to the customer’s
corporate intranet (public LAN interface). To connect the
management server:
a. As shown in Figure 2-11, connect one end of a customer-
supplied Ethernet patch cable to the left RJ-45 adapter (LAN 1)
at the rear of the server.