Filter
Top Products
3
MAP 0600: Port Failure and Link Incident Analysis
3-73
Diagnostics
4
Is fault isolation being performed at the switch?
YES NO
↓ Fault isolation is being performed at the SANpilot interface,
EFC Server, or customer-supplied server. Go to step 7.
5
Each port has an amber LED and a blue (2 Gbps operation) or green
(1 Gbps operation) LED adjacent to the port. The amber LED
illuminates and the blue or green LED extinguishes if the port fails.
Event
Code
Explanation Action
080 Unauthorized world wide name Go to step 21
081 Invalid attachment. Go to step 22.
506 Fibre Channel port failure. Go to step 11.
507 Loopback diagnostics port failure. Go to step 12.
512 SFP nonfatal error. Go to step 6.
514 SFP failure. Go to step 6.
581 Implicit incident. Go to step 34.
582 Bit-error threshold exceeded. Go to step 34.
583 Loss of signal or loss of synchronization. Go to step 34.
584 Not operational primitive sequence (NOS) received. Go to step 34.
585 Primitive sequence timeout Go to step 34.
586 Invalid primitive sequence received for link state. Go to step 34.