Filter
Top Products
3
3-2
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Diagnostics
Quick Start
Table 3-2 lists the MAPs in this chapter. Fault isolation normally
begins at MAP 0000: Start MAP on page 3-6.
However, Table 3-3 lists the event codes and the corresponding
MAPs. It is a quick start, if an event code is readily available.
IP address (factory preset) 10.1.1.10
Subnet mask 255.0.0.0
Gateway address 0.0.0.0
Table 3-1 Factory-Set Defaults (continued)
Item Default
Table 3-2 MAP Summary
MAP Page
MAP 0000: Start MAP 3-6
MAP 0100: Power Distribution Analysis 3-28
MAP 0200: POST, Reset, or IPL Failure Analysis 3-35
MAP 0300: Console Application Problem Determination 3-36
MAP 0400: Loss of Console Communication 3-46
MAP 0500: Fan and CTP Card Failure Analysis 3-67
MAP 0600: Port Failure and Link Incident Analysis 3-72
MAP 0700: Fabric, ISL, and Segmented Port Problem Determination 3-92
MAP 0800: Server Hardware Problem Determination 3-108