3
3-64
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Diagnostics
b. Connect the other cable end to a 9-pin communication port
(COM1 or COM2) at the rear of the maintenance terminal PC.
c. Power on the maintenance terminal. After the PC powers on, the
Windows desktop displays.
d. Click the Windows Start button. The Windows Workstation menu
displays.
The following steps describe inspecting event code 433 using
HyperTerminal serial communication software.
e. At the Windows Workstation menu, sequentially select
Programs, Accessories, and HyperTerminal. The Connection
Description dialog box displays.
Figure 3-30 Connection Description Dialog Box
f. Type Sphereon 3032 or Sphereon 3232 in the Name field and
click OK. The Connect To dialog box displays.