Filter
Top Products
2
2-28
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Installation Tasks
Figure 2-19 LCD Panel (LAN 2 Subnet Mask)
6. Use the arrow keys as described in step 2 to input a new subnet
mask, then press ENTER. The following message appears
(Figure 2-20):
Figure 2-20 LCD Panel (Save Change)
7. Press ENTER. A Wait a moment! message appears at the LCD
panel, the LCD panel returns to the LAN 1 Setting?? message,
and the LAN 2 subnet mask changes.
8. Record the private LAN IP address and subnet mask for reference
if the management server hard drive fails and must be restored.
Configure Public
LAN Addresses
(Optional)
To optionally configure TCP/IP network information for the public
LAN connection (LAN 1):
1. At the management server’s LCD panel, press ENTER. The
Welcome!! or operational information message changes to the
following (Figure 2-21):
Figure 2-21 LCD Panel (Password Entry)
2. Using the button to increment a digit, the button to
decrement a digit, the button to move the cursor left,
and the button to move the cursor right, input the default or
changed password, and press ENTER. The LAN 1 Setting??
message appears at the LCD panel.
3. Press ENTER and the following message appears (Figure 2-22)
with the default IP address of 192.168.0.1.
Input Netmask:
255.000.000.000
Save Change?
Yes, Save !!
Input Password:
0****