Filter
Top Products
4
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Preface
collect maintenance data, power-on, power-off, and IPL the
switch, set the switch online or offline, block ports, manage
firmware, clean fiber optics, and install or upgrade software.
Chapter 5, FRU Removal and Replacement. This chapter describes
procedures to remove and replace the switch FRUs, and the entire
switch when required.
Chapter 6, Illustrated Parts Breakdown. This chapter illustrates,
describes, and shows the location of all switch FRUs. In addition,
FRUs are cross-referenced to corresponding part numbers.
Appendix A, Messages. This appendix lists user and error
messages that appear in the EFC Manager and Sphereon Product
Manager applications at the EFC Server. A description of each
message and recommended action in response to the message are
also provided.
Appendix B, Event Code Tables. This appendix provides an
explanation of event codes that appear at the Product Manager
application. The event severity and a recommended action in
response to each event are also provided.
Appendix C, Restore EFC Server. This appendix provides the
instructions to restore all required switch applications to the EFC
Server in case of a hard drive failure.
Appendix D, Consolidating EFC Servers in a Multiswitch Fabric.
This appendix provides the instructions for consolidating
operation and network addressing of multiple EFC Servers.
The Glossary defines terms, abbreviations, and acronyms used in
the manual. An Index is also provided.
Related Publications Other publications that provide additional information about the
switch include:
• McDATA Products in a SAN Environment Planning Manual
(620-000124).
• McDATA Sphereon 3032 and 3232 Fabric Switch Product Manager
User Manual (620-000152).
• Enterprise Fabric Connectivity Manager User Manual (620-005001).
• FC-512 Fabricenter Equipment Cabinet Installation and Service
Manual (620-000100).
• McDATA SANpilot User Manual (620-000160).