Filter
Top Products
A
A-4
McDATA® Sphereon 3032 and 3232 Installation and Service Manual
Messages
Action Informational message. Install SANtegrity Binding before changing
port types in the Configure Ports dialog box while in FICON
management style.
Message Cannot disable Switch Binding while Enterprise Fabric Mode is
active and the switch is Online.
Description User attempted to disable switch binding through the Switch Binding
Change State dialog box, but Enterprise Fabric Mode is enabled.
Action You must either disable Enterprise Fabric Mode using the Enterprise
Fabric Mode dialog box in the EFC Manager application or set the
switch offline before you can disable Switch Binding.
Message Cannot enable beaconing on a failed FRU.
Description Occurs when selecting Enable Beaconing option for a failed FRU.
Action Replace FRU and enable beaconing again or enable beaconing on
operating FRU.
Message Cannot enable beaconing while the system error light is on.
Description Beaconing cannot be enabled while the system error light is on.
Action Select Clear System Error Light from Product menu to clear error light,
then enable beaconing.
Message Cannot enable Open Trunking while Enterprise Fabric Mode is
active and the switch is offline.
Description Enterprise Fabric mode is active and the switch or director is online
and user is attempting to enable Open Trunking. This message only
displays if the optional Open Trunking feature is installed.
Action Perform either of the following steps: