Filter
Top Products
2
Task 12: Assign User Names and Passwords
2-47
Installation Tasks
2. At the Windows 2000 desktop, double-click the CallHome
Configuration icon. The Call Home Configuration dialog box
displays (Figure 2-47).
Figure 2-47 Call Home Configuration Dialog Box
3. At the Call Center Phone Number field, enter the telephone number
for the McDATA Solution Center (720-566-3912). Include
necessary information, such as the country code, area code, or
any prefix required to access a telephone line outside the facility.
4. At the Local Phone Number field, enter the telephone number for
access to the local server. Include necessary information such as
the country code or area code.
5. Click OK to save the configured telephone numbers and close the
dialog box.
Task 12: Assign User Names and Passwords
In addition to password access for the Windows 2000 operating
system, users must be configured for access to the SAN management
application. To assign SAN management application user names and
passwords:
1. At the Windows 2000 desktop, the SANavigator Log In or EFCM
Log In dialog box displays (Figure 2-29 on page 2-32). The dialog
box was opened when performing Task 8: Configure Management
Server Information on page 2-30.
2. Type the SAN management application default user ID and
password and select a server or IP address from the Network
Address drop-down list.
NOTE: The default SAN management application user ID is
Administrator and the default password is password. The user
name and password are case-sensitive.