Filter
Top Products
2
2-92
McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual
Installation Tasks
d. The default user datagram protocol (UDP) port number for
trap recipients is 162.
e. Type a decimal port number in the associated UDP Port
Number field to override the default.
2. To enable or disable transmission of authorization trap messages
to unauthorized management workstations trying to access
SNMP information through the management server, select the
Enable Authorization Traps check box. A check mark in the box
enables transmission.
3. Click Activate to save the information and close the dialog box.
Configure and
Enable E-mail
Notification
Perform this procedure to configure and enable e-mail addresses and
simple mail transfer protocol (SMTP) server addresses to receive
e-mail notification of switch (and other managed product) events.
The addresses must be configured at the SAN management
application, then enabled through the Element Manager application.
Refer to Task 23: Test Remote Notification (Optional) on page 2-102 for
instructions on testing this notification feature. To configure and
enable e-mail and SMTP server addresses:
1. Close the Hardware View and return to the Products View by
clicking close (X) at the upper right corner of the window.
2. Select Configure E-Mail from the Maintenance menu. The Configure
E-Mail dialog box displays (Figure 2-75).
Figure 2-75 Configure E-Mail Dialog Box