Filter
Top Products
2
Task 8: Configure Management Server Information
2-35
Installation Tasks
5. At the Computer Name field, change the name to MGMTSERVER,
at the Workgroup field, change the name to WORKGROUP, then
click OK. The dialog box closes.
6. Record the computer and workgroup names for reference if the
management server hard drive fails and must be restored.
7. At the System Properties dialog box, click OK to close the dialog
box and return to the Control Panel window.
8. Click close (X) at the upper right corner of the Control Panel
window to return to the Windows 2000 desktop.
Configure Gateway
and DNS Server
Addresses
To configure gateway addresses and DNS server IP addresses for
the private LAN connection (LAN 2) and optional public LAN
connection (LAN 1):
1. At the Windows 2000 desktop, click Start at the left side of the
task bar, then select Settings, then Control Panel. The Control Panel
window displays (Figure 2-30 on page 2-33).
2. Double-click the Network and Dial-up Connections icon. The
Network and Dial-up Connections window displays (Figure 2-33).
Figure 2-33 Network and Dial-up Connections Window
3. To configure addresses for the private LAN connection (LAN 2),
double-click the Local Area Connection 2 icon. The Local Area
Connection 2 Status dialog box displays (Figure 2-34 on page 2-36).