Filter
Top Products
A
Sphereon 3032/3232 Element Manager Messages
A-19
Messages
Description Network address specified is not known by the domain name server.
Action Check the input address and specify the correct network address.
Message Invalid port address.
Description Invalid port address has been entered.
Action Verify port address through the Configure Addresses - “Active” dialog
box (FICON mode only) and re-enter.
Message Invalid port number.
Description Port number must be within the range of ports for the specific switch
model.
Action Enter a port number within the correct range.
Message Invalid port number. Valid ports are (0 - 31).
Description Port number must be within the range of ports for the specific switch
model. For this model, the valid port numbers are 0 - 31.
Action Enter a port number within the correct range.
Message Invalid port swap.
Description Port swap selection is not allowed.
Action Ensure that each port selected for swap has not been previously
swapped.
Message Invalid response received from switch.
Description The switch returned an invalid response.
Action Resend the firmware. If the condition persists, contact support
personnel.