NEC uPD98502 Network Cables User Manual


 
Preliminary User’s Manual S15543EJ1V0UM
23
CHAPTER 1 INTRODUCTION
The
µ
PD98502 is a high performance controller, which can perform the protocol conversion between IP Packets
and ATM Cells, which is especially suitable for ADSL router. It includes high performance MIPS based 64-bit RISC
processor VR
4120A CPU core, ATM Cell Processor, Ethernet Controller, USB Controller Block, PCI Controller Block,
UTOPIA2 interface and SDRAM interface.
1.1 Features
Includes high performance MIPS based 64-bit RISC processor VR
4120A
Can perform RTOS and network middleware (M/W) on the chip
Includes interface for PROM and flash ROM used for storing boot program
Includes 32-bit RISC controller in ATM Cell Processor
Software SAR processing by RISC controller affords flexibility for specification update
Supports CBR/VBR/UBR service classes
Includes 2-channel 10/100-Mbps Ethernet controller compliant to IEEE802.3, IEEE 802.3u and IEEE802.3x
Can directly connect external Ethernet PHY device through 3.3 V MII interface
Includes USB full speed function controller compliant to USB specification 1.1
Supports operation conforming to the USB Communication Device Class Specification
Can directly connect 64-Mbit and 128-Mbit SDRAM as external memory
Includes 32-bit 33-MHz PCI Bus Master compliant to PCI Specification Rev. 2.2
Includes 8-bit 16.5/25/33-MHz UTOPIA level 2 interface compliant to ATM Forum af-phy-0039
Includes boundary scan function (JTAG) compliant to IEEE 1149.1
Includes Micro Wire interface
Includes 2-ch general purpose timers
Using advanced CMOS technology
Power supply 2.5V(Core)/3.3V(I/O)
Package 500-pin T-BGA
1.2 Ordering Information
Part Number Package
µ
PD98502N7-H6 500-pin Tape BGA (Heat spread type) (40 × 40)