NEC uPD98502 Network Cables User Manual


 
6
Preliminary User’s Manual S15543EJ1V0UM
PREFACE
Readers This manual is intended for engineers who need to be familiar with the capability of
the
µ
PD98502 in order to develop application systems based on it.
Purpose The purpose of this manual is to help users understand the hardware capabilities
(listed below) of the
µ
PD98502.
Configuration This manual consists of the following chapters:
Introduction
VR
4120A CPU
System controller
ATM cell processor
Ethernet controller
USB controller
PCI controller
UART
Timer
Micro Wire
Guidance Readers of this manual should already have a general knowledge of electronics, logic
circuits, and microcomputers.
To gain an overall understanding of the function of the
µ
PD98502:
Read through all the chapters, in sequence.
To check the electrical characteristics of the
µ
PD98502:
Refer to the separate data sheet.
Notation This manual uses the following conventions:
Data bit significance: High-order bits on the left side;
low-order bits on the right side
Active low: XXXX_B (Pin and signal names are suffixed with _B.)
Note: Explanation of an indicated part of text
Caution: Information requiring the user’s special attention
Remark: Supplementary information
Numerical value: Binary ... xxxx or xxxxB
Decimal ... xxxx
Hexadecimal ... xxxxH
Related Document Use this manual in combination with the following document.
The related documents indicated in this publication may include preliminary versions.
However, preliminary versions are not marked as such.
µ
PD98502 Data Sheet: S15409E