Filter
Top Products
CHAPTER 7 PCI CONTROLLER
390
Preliminary User’s Manual S15543EJ1V0UM
7.5 Registers
7.5.1 Register map
R/WOffset Address Register Name
Internal
bus
PCI
Access Description
1000_4000H P_PLBA R/W R/W W/H/B PCI Lower Base Address Register
1000_4004H N/A - - - Reserved
1000_4008H P_IBBA R/W R/W W/H/B Internal Bus Base Address Register
1000_400CH N/A - - - Reserved
1000_4010H P_VERR R R W/H/B Version Register
1000_4014H P_PCAR R/W R W/H/B PCI Configuration Address Register
1000_4018H P_PCDR R/W R W/H/B PCI Configuration Data Register
1000_401CH P_IGSR RC R/W W Internal Bus General Status Register
1000_4020H P_IIMR R/W R/W W/H/B Internal Bus Interrupt Mask Register
1000_4024H P_PGSR R/W RC W PCI General Status Register
1000_4028H P_PIMR R/W R/W W/H/B PCI Interrupt Mask Register
1000_402CH N/A - - - Reserved
1000_4030H P_HMCR R/W R/W W/H/B Host Mode Control Register
1000_4034H:
1000_403CH
N/A - - - Reserved
1000_4040H P_PWCD R/W R W/H/B Power Consumption Data Register
1000_4044H P_PWDD R/W R W/H/B Power Dissipation Data Register
1000_4048H:
1000_404CH
N/A - - - Reserved
1000_4050H P_BCNT R/W R/W W/H/B Bridge Control Register
1000_4054H P_PPCR R/W R W/H/B Power Control Register
1000_4058H P_SWRR - W W Software Reset Register
1000_405CH P_RTMR R/W R/W W/H/B Retry Timer register
1000_4060H:
1000_40FCH
N/A - - - Reserved
1000_4100H:
1000_41FCH
P_CONFIG See
7.5.19
See
7.5.19
W/H/B PCI Configuration Registers
Remarks 1. In the “R/W” field,
“W” means “writeable”,
“R” means “readable”,
“RC” means “read-cleared”,
“- “ means “not accessible”.
2. All internal registers are 32-bit word-aligned registers.
3. The burst access to the internal register is prohibited.
If such burst access has been occurred, IRERR bit in NSR is set and NMI will assert to CPU.
4. Read access to the reserved area will set the CBERR bit in the NSR register and the dummy read
response data with the data-error bit set on SysCMD [0] is returned.
5. Write access to the reserved area will set the CBERR bit in the NSR register, and the write data is lost.
6. In the “Access” filed,
“W” means that word access is valid,
“H” means that half word access is valid,
“B” means that byte access is valid.
7. Write access to the read-only register cause no error, but the write data is lost.
8. The CPU can access all internal registers, but IBUS master device cannot access them.