Filter
Top Products
Wireless Configuration and Security
121
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
To allow or restrict access based on MAC addresses:
1. On the Wireless Profiles screen (see Figure 56 on page 115), click the ACL button in
the ACL column for the wireless profile for which you want to set up access control. The
MAC
Address Filtering screen displays. (The following figure shows some examples.)
Figure 58.
2. Click Add to open the MAC Address screen (not shown in this manual).
3. Ente
r a MAC address in the MAC Address field.
4. Click App
ly to add the MAC address to the MAC Address table on the MAC Address
Filtering screen.
5. Repe
at Step 2 through Step 4 for any other MAC address that you want to add to the MAC
Address table.
6. From th
e ACL Policy Status drop-down list, select if access control is enabled, and if so, how
the MAC addresses in the MAC Address table are treated:
• Open.
Access control is disabled. All MAC addresses, including the ones in the MAC
Address table, are allowed access.
• Allo
w. Only the MAC addresses in the MAC Address table are allowed access. All
other MAC addresses are denied access.
• Deny. T
he MAC addresses in the MAC Address table are denied access. All other
MAC addresses are allowed access.
7. Click App
ly to save your settings.