Filter
Top Products
Firewall Protection
186
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 99.
2. In the Email IP/MAC Violations section of the screen, specify if you want to enable email
logs for IP/MAC binding violations. (You have to do this only once.) Select one of the
following radio buttons:
• Ye
s. IP/MAC binding violations are emailed. Click the Firewall Logs & E-mail page
link to ensure that emailing of logs is enabled on the Firewall Logs & E-mail screen
(see Configure Logging, Alerts, and Event Notifications on p
age 349).
• No. IP/MAC bindin
g violations are not emailed.
3. Click Apply
to save your changes.
4. In
the IP/MAC Bindings sections of the screen, enter the settings as explained in the
following table:
5. Click the Add t
able button. The new IP/MAC rule is added to the IP/MAC Bindings table.
Table 39. IP/MAC Binding screen settings for IPv4
Setting Description
Name A descriptive name of the binding for identification and management purposes.
MAC Address The MAC address of the computer or device that is bound to the IP address.
IP Address The IPv4 address of the computer or device that is bound to the MAC address.
Log Dropped
Packets
To log the dropped packets, select Enable from the drop-down list. The default setting
is Disable.