Filter
Top Products
Network and System Management
334
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
WARNING:
If you are remotely connected to the wireless VPN firewall and you
select the No radio button to disable secure HTTP management,
you and all other SSL VPN users are disconnected when you click
Apply.
4. Click Apply to save your changes.
About Remote Access
When remote management is enabled, you need to use an SSL connection to access the
wireless VPN firewall from the Internet. You need to enter https:// (not http://) and type the
wireless VPN firewall’s WAN IP address and port number in your browser. For example, if the
wireless VPN firewall’s WAN IP address is 192.168.15.175 and the port number is 443, type
the following in your browser: https://192.168.15.175:443.
The wireless VPN firewall’s remote login URL is:
https://<IP_addre
ss>:<port_number> or
https://<FullyQualifiedDomainName>:<port_number>
The IP address can be an IPv4 or IPv6 address.
With respect to security, note the following:
• For en
hanced security, restrict access to as few external IP addresses as practical. See
Set User Login Policies on p
age 306 for instructions on restricting administrator access
by IP address.
Allow Secure HTTP
Management?
(continued)
Port Number Enter the port number through which access is allowed. The default
port number is 443.
Note: The URL through which you can securely manage over an
H
TTP connection displays below the Port Number field.
Telnet Management
Allow Telnet
Man
agement?
To enable Telnet management, select the Yes radio button. To disable Telnet
management, select the No radio button, which is the default setting.
Specify the addresses through which access is allowed by selecting one of the
follo
wing radio buttons:
• Ever
yone. There are no IP address restrictions.
• IP address range. Only users who use devices in the specified IP address range
can manage over a Telnet connection. In the From fields, type the start IP address
of the range; in the To fields, type the end IP address of the range.
• Onl
y this PC. Only a user who uses the device with the specified IP address can
manage over a Telnet connection. Type the IP address in the fields.
Table 79. Remote Management screen settings for IPv4 and IPv6 (continued)
Setting Description