Filter
Top Products
Firewall Protection
155
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
2. Click one of the following table buttons:
• Enable. Enab
les the rule or rules. The ! status icon changes from a gray circle to a
green circle, indicating that the selected rule or rules are enabled. (By default, when a
rule is added to the table, it is automatically enabled.)
• Dis
able. Disables the rule or rules. The ! status icon changes from a green circle to a
gray circle, indicating that the selected rule or rules are disabled.
• Delete. Dele
tes the selected rule or rules.
Create LAN DMZ Outbound Service Rules
You can change the default outbound policy or define rules that specify exceptions to the
default outbound policy. By adding custom rules, you can block or allow access based on the
service or application, source or destination IP addresses, and time of day. An outbound rule
can block or allow traffic between the DMZ and any internal LAN IP address according to the
schedule created on the Schedule screen.
IPv4 LAN DMZ Outbound Service Rules
To create a new IPv4 LAN DMZ outbound rule:
1. In the u
pper right of the LAN DMZ Rules screen, the IPv4 radio button is selected by default.
The screen displays the IPv4 settings (see Figure 75 o
n page 153).
Click the Add t
able button under the Outbound Services table. The Add LAN DMZ
Outbound Service screen for IPv4 displays:
Figure 77.