Filter
Top Products
Firewall Protection
150
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
3. Enter the settings as explained in Table 33 on page 131. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-do
wn lists:
• DMZ Users
• WA
N Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
m
ake selections from the following drop-down lists:
• Select Sch
edule
• Qo
S Priority
4. Click Apply. The new rule is
now added to the Outbound Services table. The rule is
automatically enabled.
Create DMZ WAN Inbound Service Rules
The Inbound Services table lists all existing rules for inbound traffic. If you have not defined
any rules, no rules are listed. By default, all inbound traffic (from the Internet to the DMZ) is
blocked.
Inbound rules that are configured on the LAN WAN Rules screen take precedence over
inbound rules that are configured on the DMZ WAN Rules screen. As a result, if an inbound
packet matches an inbound rule on the LAN WAN Rules screen, it is not matched against the
inbound rules on the DMZ WAN Rules screen.
IPv4 DMZ WAN Inbound Service Rules
To create a new IPv4 DMZ WAN inbound rule:
1. In
the upper right of the DMZ WAN Rules screen, the IPv4 radio button is selected by
default. The screen displays the IPv4 settings (see Figure 69 on p
age 146).
Click the Add t
able button under the Inbound Services table. The Add DMZ WAN
Inbound Service screen for IPv4 displays: