Virtual Private Networking Using IPSec and L2TP Connections
195
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Configuring a VPN tunnel connection requires that you specify all settings on both sides of
the VPN tunnel to match or mirror each other precisely, which can be a daunting task. The
VPN Wizard efficiently guides you through the setup procedure with a series of questions that
determine the IPSec keys and VPN policies it sets up. The VPN Wizard also configures the
settings for the network connection: security association (SA), traffic selectors, authentication
algorithm, and encryption. The settings that are used by the VPN Wizard are based on the
recommendations of the VPN Consortium (VPNC), an organization that promotes
multivendor VPN interoperability.
Create an IPv4 Gateway-to-Gateway VPN Tunnel with the
Wizard
Figure 106.
To set up an IPv4 gateway-to-gateway VPN tunnel using the VPN Wizard:
1. Select VPN >
IPSec VPN > VPN Wizard. In the upper right of the screen, the IPv4 radio
button is selected by default. The VPN Wizard screen displays the IPv4 settings. (The
following screen contains some examples that do not relate to other examples in this
manual.)