Filter
Top Products
Monitor System Access and Performance
371
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
assigned a static IP address, you need to update this entry manually after the IP address
on the computer or device has changed.
• M
AC Address. The MAC address of the computer’s or device’s network interface.
• Group. Each compu
ter or device can be assigned to a single LAN group. By default, a
computer or device is assigned to Group 1. You can select a different LAN group from the
Group drop-down list in the Add Known PCs and Devices section or on the Edit Groups
and Hosts screen.
• Action. The
Edit table button, which provides access to the Edit Groups and Hosts
screen.
Note: If the wireless VPN firewall is rebooted, the data in the Known PCs
and Devices table is lost until the wireless VPN firewall rediscovers
the devices.
View the DHCP Log
To review the most recent entries in the DHCP log:
1. Select Network Config
uration > LAN Setup. The LAN Setup screen displays the IPv4
settings. (see Figure 31 on p
age 59).
2. Click the DH
CP Log option arrow to the right of the LAN Setup tab. The DHCP Log screen
displays:
Figure 223.
To view the most recent entries, click Refresh Log. To delete all the existing log entries,
click Clear Log. Click the LAN Setup option arrow in the upper right to display the LAN
Setup (IPv4) screen, from which you can modify the DHCP settings (see Configure a
VLAN Profile o
n page 59).