Filter
Top Products
Virtual Private Networking Using IPSec and L2TP Connections
241
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
information such as a user name and password or some encrypted response using his or her
user name and password information. The gateway then attempts to verify this information
first against a local user database (if RADIUS-PAP is enabled) and then by relaying the
information to a central authentication server such as a RADIUS server.
Note: Even though you can configure RADIUS servers with IPv4
addresses only, the servers can be used for authentication,
authorization, and accounting of both IPv4 and IPv6 users.
To configure primary and backup RADIUS servers:
1. Select VPN > IPSec VPN
> RADIUS Client. The RADIUS Client screen displays:
Figure 144.
2. Complete the settings as explained in the following table:
Table 56. RADIUS Client screen settings
Setting Description
Primary RADIUS Server
To enable and configure the primary RADIUS
server, select the Yes radio button, and then enter the
settings for the three fields to the right. The default setting is that the No radio button is selected.
Primary Server IP Address The IPv4 address of the primary RADIUS server.