Filter
Top Products
Virtual Private Networking Using IPSec and L2TP Connections
204
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Use the VPN Wizard to Configure the Gateway for a Client Tunnel
To set up a client-to-gateway VPN tunnel using the VPN Wizard:
1. Select VPN > IPSec
VPN > VPN Wizard. In the upper right of the screen, the IPv4 radio
button is selected by default. The VPN Wizard screen displays the IPv4 settings. (The
following figure contains an example.)
Figure 117.
To display the wizard default settings, click the VPN Wizard default values option arrow
in the upper right of the screen. A pop-up screen displays (see Figure 108 on
page 197),
showing the wizard default values. After you ha
ve completed the wizard, you can modify
these settings for the tunnel policy that you have set up.