Filter
Top Products
IPv4 and IPv6 Internet and Broadband Settings
41
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
5. As an optional step: If you have selected the Stateless Address Auto Configuration radio
button, you can select the Prefix Delegation check box:
• Prefix
delegation check box is selected. A prefix is assigned by the ISP’s stateful
DHCPv6 server through prefix delegation, for example, 2001:db8:: /64. The wireless
VPN firewall’s own stateless DHCPv6 server can assign this prefix to its IPv6 LAN
clients. For more information about prefix delegation, see Stateless DHCPv6 Server
With Prefix Delegation on p
age 74.
• Prefix
delegation check box is cleared. Prefix delegation is disabled. This is the
default setting.
6. Click App
ly to save your changes.
7. T
o verify the connection, click the Status option arrow in the upper right of the screen to
display the Connection Status pop-up screen. (The following figure shows a dynamic IP
address configuration.)
Figure 20.
The Connection Status screen should show a valid IP address and gateway, and you are
connected to the Internet. If the configuration was not successful, see Troubleshoot the
ISP Connection on
page 382.
Note: For more information about the Connection Status screen, see View
the WAN Port Status on page 367.
Configure a Static IPv6 Internet Connection
To configure a static IPv6 or PPPoE IPv6 Internet connection, you need to enter the IPv6
address information that you should have received from your ISP.
To configure static IPv6 broadband ISP settings:
1. Select Network Configuratio
n > WAN Settings > Broadband ISP Settings.
2. In the upper
right of the screen, select the IPv6 radio button. The ISP Broadband Settings
screen displays the IPv6 settings: