Filter
Top Products
Virtual Private Networking Using SSL Connections
276
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
- A split tunnel sends only traffic that is destined for the local network based on the
specified client routes. All other traffic is sent to the Internet. A split tunnel allows you
to manage bandwidth by reserving the VPN tunnel for local traffic only.
• If you ena
ble split-tunnel support and you assign an entirely different subnet to the VPN
tunnel clients from the subnet that is used by the local network, you need to add a client
route to ensure that a VPN tunnel client connects to the local network over the VPN
tunnel.
Configure the Client IP Address Range
First determine the address range to be assigned to VPN tunnel clients, and then define the
address range.
To define the client IP address range:
1. Select VPN > SSL VPN
> SSL VPN Client. The SSL VPN Client screen displays the
IPv4 settings (the following screen shows some examples).
2. S
pecify the IP version for which you want to configure the SSL VPN client:
• IPv4. In
the upper right of the screen, the IPv4 radio button is already selected by
default. Go to Step 3.
Figure 166. SSL VPN Client screen for IPv4