Filter
Top Products
Monitor System Access and Performance
368
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 220.
The type of connection determines the information that is displayed on the Connection
Status screen. The screen can display the information that is described in the following
table:
Click Disc
onnect to disconnect the connection; click Connect to establish the
connection.
Table 90. Connection Status screen information for an IPv4 connection
Item Description
Connection Time The period that the wireless VPN firewall has been connected through the WAN port.
Connection Type The connection type can be either DHCP or Static IP.
Connection Status The connection status can be either Con
nected or Disconnected.
IP Address The addresses that were automatically detected or that you configured on the
Broadband ISP Settings (IPv4) screen.
Note: For more information, see Let the Wireless VPN Firewall Automatically
Detect
and Configure an IPv4 Internet Connection on page 28 and Manually Configure an
IPv4 Internet Connection on pag
e 31.
Subnet Mask
Gateway
DNS Server
DHCP Server DHCP only. The DHCP server that was automa
tically detected. This field displays
only if your ISP does not require a login and the IP address is acquired dynamically
from your ISP. You have configured these ISP settings on the Broadband ISP
Settings screen.
Note: For more information, see Let the Wireless VPN Firewall Automatically
Detect
and Configure an IPv4 Internet Connection on page 28 and Manually Configure an
IPv4 Internet Connection on pag
e 31.
Lease Obtained DHCP only. The time when the DHCP lease was obtained.
Lease Duration DHCP only. The period that the DHCP lease remains in effect.