Filter
Top Products
Virtual Private Networking Using SSL Connections
278
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
4. Click Apply to save your settings. VPN tunnel clients are now able to connect to the wireless
VPN firewall and receive a virtual IP address in the client address range.
Add Routes for VPN Tunnel Clients
The VPN tunnel clients assume that the following networks are located across the
VPN-over-SSL tunnel:
• The subnet that cont
ains the client IP address (that is, PPP interface), as determined by
the class of the address (Class A, B, or C).
• Subnet
s that are specified in the Configured Client Routes table on the SSL VPN Client
screen.
If the assigned client IP address range is in a dif
ferent subnet from the local network, or if the
local network has multiple subnets, or if you select split-tunnel operation, you need to define
client routes.
To add an SSL VPN tunnel client route:
1. Select VPN > SSL VPN
> SSL VPN Client. The SSL VPN Client screen for IPv4
displays (see Figure 166 on p
age 276).
2. S
pecify the IP version for which you want to add a route:
• IPv4. In
the upper right of the screen, the IPv4 radio button is already selected by
default. Go to Step 3.
• IPv6. Select
the IPv6 radio button. The SSL VPN Client screen displays the IPv6
settings (see Figure 167 on p
age 277).
Secondary DNS Server The IP address of the secondary DNS server that is assigned to the VPN
tunnel clients. This setting is optional.
IPv4 screen only
Client Address
R
ange Begin
The first IP address of the IPv4 address range that you
want to assign to the VPN tunnel clients. By default, the
first IPv4 address is 192.168.251.1.
Client Address
R
ange End
The last IP address of the IPv4 address range that you
want to assign to the VPN tunnel clients. By default, the
last IPv4 address is 192.168.251.254.
IPv6 screen only
Client IPv6
Ad
dress Range
Begin
The first IP address of the IPv6 address range that you
want to assign to the VPN tunnel clients. By default, the
first IPv6 address is 4000::1.
Client IPv6
Ad
dress Range
End
The last IP address of the IPv6 address range that you
want to assign to the VPN tunnel clients. By default, the
last IPv6 address is 4000::200.
Table 68. SSL VPN Client screen settings for IPv4 and IPv6 (continued)
Setting Description