NETGEAR FVS318N Modem User Manual


 
Network and System Management
345
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
3. Click Apply to save your settings.
Note: If you select the default NTP servers or if you enter a custom server
FQDN, the wireless VPN firewall determines the IP address of the
NTP server by performing a DNS lookup. Before the wireless VPN
firewall can perform this lookup, you need to configure a DNS server
address on the Broadband ISP Settings screen (see
Manually
Configure an IPv4 Internet Connection on page 31.)
NTP Servers (default or
custom)
Select one of the following radio buttons to specify the NTP servers:
Use
Default NTP Servers. The wireless VPN firewall regularly updates its
RTC by contacting a default NETGEAR NTP server on the Internet.
Use
Custom NTP Servers. The wireless VPN firewall regularly updates its
RTC by contacting one of two custom NTP servers (primary and backup),
both of which you need to specify in the fields that become available with this
selection.
Note: If you select the Use Custom NTP Servers
option but leave either the
Server 1 or Server 2 field blank, both fields are set to the default NETGEAR
NTP servers.
Note: A list of public NTP servers is available at
http://support.ntp.org/bin/view/Servers/WebHome.
NTP Servers (custom) Server 1 Name / IP Address Enter the IP address or host name of the primary
NTP se
rver.
Server 2 Name / IP Address Enter the IP address or host name of the backup
NTP server.
Table 83. Time Zone screen settings (continued)
Setting Description