Filter
Top Products
Virtual Private Networking Using IPSec and L2TP Connections
217
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
4. Click Apply to use the new settings immediately, and click Save to keep the settings for
future use.
Configure the Global Parameters
To specify the global parameters:
1. Click Glob
al Parameters in the left column of the Configuration Panel screen. The
Global Parameters pane displays in the Configuration Panel screen:
Figure 130.
2. Specify the default lifetimes in seconds:
• Authentication (IKE), Default. Th
e default lifetime value is 3600 seconds. Change
this setting to 28800 seconds to match the configuration of the wireless VPN firewall.
• En
cryption (IPSec), Default. The default lifetime value is 1200 seconds. Change this
setting to 3600 seconds to match the configuration of the wireless VPN firewall.
3. Click App
ly to use the new settings immediately, and click Save to keep the settings for
future use.
The wireless VPN firewall configuration is now complete.
PFS and Group Select the PFS check box, and then select the DH2 (1024) key group from the
drop-down list.
Note: On the wireless VPN firewall, this key g
roup is referred to as Diffie-Hellman
Group 2 (1024 bit).
Table 49. VPN client IPSec configuration settings (continued)
Setting Description