Filter
Top Products
Firewall Protection
182
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Set a Schedule to Block or Allow Specific Traffic
Schedules define the time frames under which firewall rules can be applied. Three
schedules, Schedule 1, Schedule 2, and Schedule 3, can be defined, and you can select any
one of these when defining firewall rules.
To set a schedule:
1. Select Security > Service
s > Schedule 1. The Schedule 1 screen displays:
Figure 97.
2. In the Scheduled Days section, select one of the following radio buttons:
• All Days. T
he schedule is in effect all days of the week.
• S
pecific Days. The schedule is in effect only on specific days. To the right of the radio
buttons, select the check box for each day that you want the schedule to be in effect.
3. In
the Scheduled Time of Day section, select one of the following radio buttons:
• All Day. The sche
dule is in effect all hours of the selected day or days.
• S
pecific Times. The schedule is in effect only during specific hours of the selected
day or days. To the right of the radio buttons, fill in the Start Time and End Time fields
(Hour, Minute, AM/PM) during which the schedule is in effect.
4. Click Apply
to save your settings to Schedule 1.
Repeat these steps to set to a schedule for Schedule 2 and Schedule 3.