NETGEAR FVS318N Modem User Manual


 
IPv4 and IPv6 Internet and Broadband Settings
40
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Stateful address autoconfiguration. The wireless VPN firewall obtains an interface
address, configuration information such as DNS server information, and other parameters
from a DHCPv6 server. The IP address is a dynamic address.
To automatically configure the WAN port for an IPv6 connection to the Internet:
1. Select Netwo
rk Configuration > WAN Settings > Broadband ISP Settings.
2. In
the upper right of the screen, select the IPv6 radio button. The ISP Broadband Settings
screen displays the IPv6 settings:
Figure 19.
3. In the Internet Address section of the screen, from the IPv6 drop-down list, select DHCPv6.
4. In
the DHCPv6 section of the screen, select one of the following radio buttons:
S
tateless Address Auto Configuration
S
tateful Address Auto Configuration