Filter
Top Products
Network and System Management
338
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
To delete one or more SNMP configurations:
1. On the SNMP screen (see Figure 200 on page 336), select the check box to the left of
each SNMP configuration that you wa
nt to delete, or click the Select All table button to
select all SNMP configurations.
2. Click the Delete t
able button.
To edit the SNMPv3 default users:
1. On
the SNMP screen (see Figure 200 on page 336), click the Edit button in the Action
column of the SNMPv3 User table for the SNMPv3 default user that you want to modify.
The Edit User screen d
isplays:
Figure 202.
2. Configure the settings as explained in the following table:
Table 81. Edit User screen settings for SNMPv3 users
Setting Description
Username The default user name (admin or guest) for information only.
Access Type The default access type (RWUSER or ROUSER) for information only.
Security Level From the drop-down list, select the security level for communication between
the SNMPv3 user and the SNMP
agent that collects the MIB objects from the
wireless VPN firewall:
• NoAuthNoPr
iv. Both authentication and privacy are disabled. This is the
default setting.
• AuthNoPriv. Authen
tication is enabled but privacy is disabled. Make a
selection from the Authentication Algorithm drop-down list and enter an
authentication password.
• Au
thPriv. Authentication and privacy are enabled. Make a selection from the
Authentication Algorithm drop-down list and enter an authentication
password. In addition, make a selection from the Privacy Algorithm
drop-down list and enter a privacy password.