Filter
Top Products
Network and System Management
336
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
SNMP lets you monitor and manage your wireless VPN firewall from an SNMP manager. It
provides a remote means to monitor and control network devices, and to manage
configurations, statistics collection, performance, and security. The wireless VPN firewall
supports SNMPv1, SNMPv2c, and SNMPv3.
To configure the SNMP settings:
1. Select Administ
ration > SNMP. The SNMP screen displays. (The following figure
contains an example.)
Figure 200.
The SNMPv3 Users table includes the default SNMPv3 users that are preconfigured on
the wireless VPN firewall. The SNMPv3 Users table shows the following columns:
• Username. The default user names (admin or guest).
• Access
Type. Read-write user (RWUSER) or read-only user (ROUSER). By default,
the user Admin is an RWUSER and the user guest is an ROUSER.
• Security Le
vel. The level of security that indicates whether security is disabled:
- NoAuthNoPr
iv. Both authentication and privacy are disabled.
- AuthNoPr
iv. Authentication is enabled but privacy is disabled.
- AuthPr
iv. Both authentication and privacy are enabled.
The SNMP Configuration table shows the following columns:
• IP Address. T
he IP address of the SNMP manager.
• Subnet Mask.
The subnet mask of the SNMP manager.
• Port. The tra
p port number of the SNMP manager.
• SNMP V
ersion. The SNMP version (v1, v2c, or v3).
• Communit
y. The trap community string of the SNMP manager.