Filter
Top Products
Firewall Protection
148
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
• Disable. Disables the rule or rules. The ! status icon changes from a green circle to a
gray circle, indicating that the selected rule or rules are disabled.
• Delete. Deletes the sele
cted rule or rules.
Create DMZ WAN Outbound Service Rules
You can change the default outbound policy or define rules that specify exceptions to the
default outbound policy. By adding custom rules, you can block or allow access based on the
service or application, source or destination IP addresses, and time of day. An outbound rule
can block or allow traffic between the DMZ and any external WAN IP address according to
the schedule created on the Schedule screen.
IPv4 DMZ WAN Outbound Service Rules
To create a new IPv4 DMZ WAN outbound rule:
1. In
the upper right of the DMZ WAN Rules screen, the IPv4 radio button is selected by
default. The screen displays the IPv4 settings (see Figure 69 on p
age 146).
Click the Add t
able button under the Outbound Services table. The Add DMZ WAN
Outbound Service screen for IPv4 displays:
Figure 71.