Introduction
19
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Bottom Panel with Product Label
The product label on the bottom of the wireless VPN firewall’s enclosure displays factory
defaults settings, regulatory compliance, and other information.
Figure 3.
Choose a Location for the Wireless VPN Firewall
The wireless VPN firewall is suitable for use in an office environment where it can be
freestanding (on its runner feet) or mounted into a standard 19-inch equipment rack.
Alternatively, you can rack-mount the wireless VPN firewall in a wiring closet or equipment
room.
Consider the following when deciding where to position the wireless VPN firewall:
• T
he unit is accessible, and cables can be connected easily.
• Cab
ling is away from sources of electrical noise. These include lift shafts, microwave
ovens, and air-conditioning units.
• W
ater or moisture cannot enter the case of the unit.
• Airflow aro
und the unit and through the vents in the side of the case is not restricted.
Provide a minimum of 25 mm or 1 inch clearance.
• T
he air is as free of dust as possible.
• T
emperature operating limits are not likely to be exceeded. Install the unit in a clean,
air-conditioned environment. For information about the recommended operating
temperatures for the wireless VPN firewall, see Appendix A, Default Settings and
Technical Specifications.