Filter
Top Products
Network and System Management
337
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
2. To specify a new SNMP configuration, in the Create New SNMP Configuration Entry section
of the screen, enter the settings as explained in the following table:
3. Click Add
to add the new SNMP configuration to the SNMP Configuration table.
To edit an SNMP configuration:
1. On the
SNMP screen (see the previous figure), click the Edit button in the Action
column of the SNMP Configuration table for the SNMP configuration that you want to
modify. The Edit SNMP screen displays:
Figure 201.
2. Modify the settings as explained in the previous table.
3. Click App
ly to save your settings.
Table 80. SNMP screen settings
Setting Description
IP Address Enter the IP address of the new SNMP manager.
Subnet Mask Enter the subnet mask of the new SNMP manager.
Note the following:
• If you want to narrow down the number of device
s that can access the wireless
VPN firewall through the host IP address and receive traps, enter an IP address
with a subnet mask of 255.255.255.252.
• If you want to allow a subnet to access the wireless VPN firewall through the host
IP a
ddress and receive traps, enter an IP address with a subnet mask of
255.0.0.0. The traps are received at the IP address, but almost the entire subnet
has access through the community string.
SNMP Version From the drop-down list, select the SNMP version:
• v1. SNMPv1.
• v2
c. SNMPv2c.
• v3. SNMPv3.
Port Enter the port number of the new SNMP man
ager. The default port number is 162.
Community Enter the community string that allows the SNMP manager access to the MIB
objects of the wireless VPN firewall for the purpose of reading only.