Filter
Top Products
LAN Configuration
81
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
To configure the Router Advertisement Daemon for the LAN:
1. Select Network Configuration > LAN Setup.
2. In the uppe
r right of the screen, select the IPv6 radio button. The LAN Setup screen displays
the IPv6 settings (see Figure 38 on p
age 75.)
3. T
o the right of the LAN Setup tab, click the RADVD option arrow. The RADVD screen for the
LAN displays. (The following figure contains some examples.)
Figure 41.
4. Enter the settings as explained in the following table:
Table 16. RADVD screen settings for the LAN
Setting Description
RADVD Status Specify the RADVD status by making a selection from the drop-down list:
• Enable. The RADVD is enabled, and the RADVD fields become available for you to
configure.
• Dis
able. The RADVD is disabled, and the RADVD fields are masked out. This is the
default setting.
Advertise Mode Specify the advertisement mode by
making a selection from the drop-down list:
• Un
solicited Multicast. The wireless VPN firewall advertises unsolicited multicast
packets at a rate that is specified by the advertisement interval.
• U
nicast only. The wireless VPN firewall responds to unicast packet requests only.
No unsolicited packets are advertised. Select this option for nonbroadcast multiple
access (NBMA) links such as ISATAP.