Filter
Top Products
Chapter 11 –
IP Network Services
11-4
IP Network Services - Routers
The Routers page displays the information for the configured routes in the
system. The RMX 1000 packets will be transmitted via these static routes. You
can modify or delete an existing route by selecting the route, or just click the
New button to create a new route. The table below shows the descriptions for
route parameters.
Routers Setting
Parameter
Description
Router IP Address
Set the IP address for the sending router of packet
transmission
Remote IP Address Set the target network address for packet transmission
Subnet Mask Set the subnet mask for the target network
You cannot modify the default route on this page. To set the default route, select the "IP
Network Services->
Properties" page, and then select the "Set as Default" check box
next to the configured gateway. For more information, see LAN Setting.
Gatekeeper
In the "IP Network Services" interface, click "Gatekeeper" to configure the
gatekeeper information.
If a gatekeeper device is configured on your network, you have the option to
register RMX with the gatekeeper and configure the related parameters.