Filter
Top Products
User Guide for Polycom® RMX™ 500 and Polycom® RMX™1000 Systems
(Conference on Ports)
18-7
[Example 2] Set the 100M half duplex for the LAN 1 interface:
After you set the connection feature or IP address for the LAN interface, the system
must be restarted in order for the new settings to take effect.
Password Checking
Key in "password checking {on| off}" after the prompt "#" to enable or disable
the password checking function.
When password checking are enabled and you are setting a user password on
the Web page, you must enter a password consisting of letters, numbers and
special characters (~` ! @ # $ ^ * ( )_- [ ] ; : , . / ?), with a length of 8-40
characters.
Password Encryption
Key in "password encryption {on| off}" after the prompt "#" to enable or
disable the password encryption function.
When password encryption is enabled and a user is logging into the Web
configuration page, the system will use a more complex encryption algorithm
for the entered login password to ensure the security of this
network-transmitted password, and at the same time, the system will use the
HTTPS protocol to establish an SSL security connection with the client. In this
mode, when a user enters his/her username and password and click Login,
the user may be prompted that this website has been blocked or the security
certificate has expired based on the currently-used IE browser's version. In
order to enter the system, the user must allow the website contents to be
displayed and re-enter his/her login information when prompted. If high
security requirement is not necessary, we recommend that you disable this
function.
Set I-frame Timing Interval
Key in "iframe timing interval {value}" after the prompt "#" to set the timing
interval for an endpoint to launch an I-frame request.
Parameters Description
Parameter
Description
value
Time interval, 10 seconds by default, with a
modification range of 10 – 300 seconds.