Filter
Top Products
User Guide for Polycom® RMX™ 500 and Polycom® RMX™1000 Systems
(Conference on Ports)
11-7
Parameter
Description
Server Domain Name
Provides the domain name of SIP server for registration
service.
User Name
User name provided by the SIP server for the registered
user.
Password Password matched with the user name.
Outbound Proxy
Server
For communication with the SIP server when the RMX
system is configured on the internal network, an outbound
proxy server is required to implement traversal of the
firewall/NAT. In this case, you need to set the IP address
and port number for the outbound proxy server.
QoS
Quality of Service(QoS) is very important in transmission of high-bandwidth
audio and video data. You can use QoS to test and guarantee the following
parameters:
• Average packet delay
• Delay variation (jitter)
• Error rate
In the "IP Network Services" interface, click "QoS" to configure the QoS
information.
IP Network Services - QoS
The table below explains the meanings for all QoS parameters.
QoS Parameter Settings
Parameter
Description
Enable
Select this option to enable configuration of the QoS
settings. When un-checked, the system uses the default
QoS settings.
Type
DiffServ and Precedence are two methods for encoding
packet priority. The priority set here for audio and video
packets should match the priority set in the network