Filter
Top Products
Chapter 2 –
First Time Installation and Configuration
2-4
3 The Product Activation dialog box is displayed. Fill the activation key
obtained previously from Get the product activation key. Enter the
product activation Key. Click Save. Click Close.
4 The system displays a message asking whether to restart the system or not.
At the prompt, select Restart Now.
5 After the system restarts, go to Administration->License Information
interface in the Web configuration interface to view the activated
functions. For the activated functions, is displayed, or else is
displayed.
Modify the default IP address.
After accessing the RMX Web configuration interface, you can modify the
default IP address for the system based on the settings of your local network.
1 Click the "IP Network Services" configuration item in the "RMX
Management" pane.
2 In the "IP Network Services" configuration pane, double-click or
right-click "LAN 1->Properties".
3 In the LAN1 Properties interface, set the IP address obtained from the
network administrator, and configure the system on your local network.
IP Network Services – LAN Port Setting
LAN Port Setting Parameters
Parameter
Description
Use LAN1 Enables/disables the network port.
DHCP
If the user network is configured with a DHCP (Dynamic
Host Configuration Protocol) server, select this option to
automatically obtain the IP address.
Deselect this option to use a static IP address, in which
case you must configure the following options.
- IP Address
- Subnet Mask
- Gateway