Filter
Top Products
User Guide for Polycom® RMX™ 500 and Polycom® RMX™1000 Systems
(Conference on Ports)
4-13
Parameter Description
• High-resolution graphics: for high quality image detail display,
with broader bandwidth required.
• Live Video: for full-motion of dynamic video display, with the
broadest bandwidth required.
When you send
videos to an
endpoint which
does not support
H.239, the
system will use
dual stream
contents to
replace
conference
videos
This function is very useful if an endpoint in the conference
which does not support H.239 dual streams wants to watch
content videos. When this function is enabled and dual streams
are sent in a conference, the system will use contents videos
instead of conference videos to send to endpoints which do not
support H.239 so that contents videos instead of conference
videos can be watched on the endpoints. This option does not
affect endpoints which support H.239.
Video Setting
To set the multi-screen layout of conference on the endpoint screen, click the
"Video Settings" tab on the "New Profile" interface.
Video Setting Parameters
Parameter Description
Video Mode
The video mode determines the strategy used in a conference
for displaying conference videos at each participant's endpoint.
You can select one of the following modes:
• Lecture Mode: All the participants’ endpoints will display the
selected lecturer in full screens, and the lecturer’s endpoint
will display other participants according to the layout set
here. Administrator can specify a lecturer after the
conference is held. For details, see the lecture mode
description in Choose a personalized layout.
• Same Layout: All the participants' endpoints in the
conference will display the same multi-screen image
according to the layout set here. This setting will allow sites
to see their own loopback images which usually will not be
displayed.
Automatic Polling
Interval
Sets the time interval for automatic polling from one conference
to another conference, with an optional range of 10-300
seconds. An administrator can specify automatic conference
polling in a multi-screen window after a conference is held. For
more information, see
Customized Polling .
You can set specific multi-screen layouts based on video modes selected. You
can choose to allow the system to automatically select a multi-screen layout
based on the number of added participants, or specify a fixed multi-screen
layout.
To set automatic multi-screen layout:
1 Click "Auto" at the left part of the multi-screen setting area to display the
automatic multi-screen layout pane.