Filter
Top Products
User Guide for Polycom® RMX™ 500 and Polycom® RMX™1000 Systems
(Conference on Ports)
9-7
Setting Message Overlay
Parameter Description
Enable
Select this option to enable message overlay. Then you can set
other parameters.
Contents Enter the content to be displayed.
Font Size Set the font size of the message overlay.
Color
Set the color matching scheme for the message overlay font
and background.
Display Times Move the slider to set the display times of the message overlay.
Display Speed
Move the slider to set the display speed of the message
overlay. If the display speed is set to 0, the message will be
displayed in the center of the screen as a banner.
Vertical Boundary
Move the slider to set the vertical boarder of the message
overlay.
Transparency Move the slider to set the contrast of the message overlay.
Setting the Conference Name
The conference name is also the endpoint name, which marks each site on the
viewed screen. The site name displayed at each participant's endpoint
comes from the system name set for the endpoint.
To set the conference name:
1 In the Conferences list pane, double-click the desired conference.
2 On the conference parameter interface, click "Site Name" to enter the site
setting interface. Select the "Always show site name" check box, and set
the related parameters. You can set the Font Size and Overlay Position.
In the video switching conference mode, you cannot set the conference Message
Overlay or conference name.
Specify the Dual Stream Sender in a Cascading Conference
When the profile used by a cascading conference has the root cascading mode
enabled (see Advanced configuration in Conference Profile), the administrator
can specify a participant in the conference as the dual stream sender so that
only the dual stream sender can send dual streams in the conference. If no
dual stream sender is specified, all participants can send dual streams.
Specify a dual stream sender:
1 Click the conference to be configured on the Conferences list pane, and
then click on the toolbar.
2 On the popup page, right-click the participant you want to configure in
the participant list, and then click Become a Dual Stream Sender.