Filter
Top Products
Chapter 14 –
System Maintenance
14-8
directly in the left text box, and then click "Upload Signed Certificate" to
upload the certificate to the RMX system.
Click View Certificate Information to check the information for certificates
installed on RMX.
Since the HTTPS protocol is used when the SSL security connection is set up
between the user client and server, you must enter through the browser
"https: //IP address of the system" to ensure successful connection if you
need to access the Web page of system after the system is installed with the
certificate. In addition, you must install the certificate at your local computer
as instructed by the popup prompt box. After that, communications between
the client and Web server will always be encrypted based on the SSL security
connection to ensure security of data transmission.
SNMP Setting
RMX supports the Simple Network Management Protocol (SNMP). You can
monitor the MCU status by managing the workstation.
Click the "Setup->SNMP Setting" menu item at the upper left part to enter the
SNMP Properties interface.
SNMP Properties Interface
Setting the Agent
Configure the following parameters on the "SNMP Properties->Agent"
interface:
Parameter Configuration of SNMP Agent
Parameter
Description
SNMP Enabled
With this option selected, the administrator is allowed to
manage the RMX system with SNMP from a far end. Only after
the SNMP function is enabled, can you configure the following
parameters.
Retrieve MIB Files
You can export MIB files by clicking this button.