Filter
Top Products
User Guide for Polycom® RMX™ 500 and Polycom® RMX™1000 Systems
(Conference on Ports)
14-19
Console Interface – Highlighting Rescue
If you have no operation for 5 seconds on the above interface, the system
will automatically enter the normal mode. In that case you need to reboot
the system again to recreate the opportunity to select rescue.
6 The system remains in a startup state for approximately 1 minute. When
the screen shows the current system IP address, the system now is
running under the rescue mode successfully.
Console Interface –Booting into the Rescue Mode
To use the RMX 1000 Rescue tool to reload software packages:
1 In the PC used for uploading the software packages, run the RMX 1000
Rescue utility in the CD provided with the product. Please make sure the
PC can communicate with RMX 1000.
2 In the Rescue Client for RMX 1000 interface, input the MCU IP address
and then click Browse button to select Kernel System package (.ppm) in
the folder where Version 2.5 files are saved.
3 Click Send, the progress bar will appear indicating the uploading