Filter
Top Products
18-2
If you entered a wrong password, you may be required to re-login to the
system.
If you entered the right password, you will be brought directly to the
command setting interface.
Command Introduction
Help
After logging in to the system, you can enter "?" or "help" after the prompt "#"
to show the command prompt information.
• "< >" indicates the optional parameter.
• "{ }" indicates the required parameter.
• " | " indicates a 1-out-of-N parameter.
Exit
Enter "exit" after the prompt "#" to exit the command control interface.
View Device Information
Enter "show" after the prompt "#" to view the current device information,
including the system information, license information, interface information,
and IP address.
Idle Timeout Setting
Enter "keepalive <timeout>" after the prompt "#" to modify the keep-live
timeout setting. If no operation was executed in the defined time interval, the
device will time out and exit.