Filter
Top Products
User Guide for Polycom® RMX™ 500 and Polycom® RMX™1000 Systems
(Conference on Ports)
14-9
Parameter
Description
Contact person for
this MCU
Specifies the name of the person who manages this MCU from
a far end
MCU Position Specifies the location of MCU
MCU System
Name
Specifies the system name of MCU
SNMP Agent
Version
Specifies the SNMP agent version used by MCU
•
Version 1 and Version 2 - When this option is selected, you
need to configure "Community Name".
•
Version 3 - Specifies the parameter settings of secure and
remote configuration; when this option is selected, you need
to configure "User Name", "Security Level" and related
options.
Community Name
Specifies the name of community to which the MCU and SNMP
management workstation belongs. Community Name is used
by the agent to authenticate the SNMP management
workstation.
User Name Set the name of user remotely accessed by SNMP.
Security Level
Specifies whether to enable the authentication mechanism and
encryption mechanism
Authentication
Protocol
Specifies the authentication algorithm. MD5 and SHA are
available.
Authentication
Password
You can set a password for the authentication protocol to
enhance security.
Encryption
Protocol
Specifies the encryption algorithm. DES and AES are
available.
Encryption
Password
You can set a password for the encryption protocol to enhance
security.
Setting Traps
Click the Traps tab on the SNMP Properties page.