Filter
Top Products
User Guide for Polycom® RMX™ 500 and Polycom® RMX™1000 Systems
(Conference on Ports)
5-3
DTMF Code Setting
To set the recording control operations and rights for use by connected
endpoints, click the DTMF Codes tab.
Recording Link - DTMF Codes
The table below explains the detailed meanings of these parameters.
Recording Link - Description for DTMF Code Setting
Parameter Description
Name Name of the recording operation
DTMF Code
Set the remote control key combination used to perform the
operation. The default numbers can be customized. For
example, the default DTMF code for the Start Recording
command is *2, you can press the keys *2 to start conference
recording.
Note:
Before using the DTMF command, enable the DTMF
function of the endpoint according to that endpoint's
instructions.
Privilege
Set the rights of using DTMF codes. Chairperson indicates that
the DTMF is available to the conference chairperson only;
Everyone indicates that the DTMF is available to all
participants.
Recording Control
When a conference is going on, you can view and control the status of the
configured recording link. In the Conferences list pane, select this conference.
Then the list pane located on the right side shows the defined participants
and connected participants in the conference, where the recording link is
indicated by the icon.
When a conference is going on, you can control the recording as follows
through the recording buttons in the list pane or the right-click shortcut menu
of recording link:
• - Start Recording
• - Pause Recording
• - Stop Recording
• A conference chairperson can also use the PCM interface for recording control.
For more information, see Recording a Conference.