Filter
Top Products
Chapter 16 –
Personal Conference Manager (PCM)
16-8
In the FECC status, if you performed no FECC operation in 10 seconds or used the
DTMF function, you will be automatically signed out of the FECC state and brought to
the conference image.
Recording a Conference
When a recording link has been set up in the conference, the conference
chairperson can start recording, suspend recording, and stop recording
through the PCM interface. For more information about recording links, see
Recording Link.
Start conference recording:
1 Select Recording from the PCM main menu, and press the right arrow key
to confirm.
2 Press the right arrow key on the remote control to start conference
recording. Now, the page shows the recording suspending and stopping
menu so that you can control the recording process.
Disconnect Participant
Disconnect Participant:
1 Enter the second page of the PCM main menu, select "Disconnect
Participant", and then press the right arrow key to confirm.
2 Select the participant to be disconnected by pressing the up arrow key and
down arrow key on the remote control, and press the right arrow key to
confirm.
Terminate Conference
Terminate Conference:
1 Enter the second page of the PCM main menu, select "Terminate
Conference", and then press the right arrow key to confirm.
2 The interface displays the prompt message for confirming deletion. Press
the left arrow key to cancel, or press the right arrow key to confirm the
deletion.