User Guide for Polycom® RMX™ 500 and Polycom® RMX™1000 Systems
(Conference on Ports)
21-6
1 Click Conference List .
2 Click Control .
3 Click one or more meeting rooms to be controlled.
4 Click meeting room control toolbar to carry out control.
Button Name Description
Add Meeting Room
Add a new meeting room to the current
conference.
Connect
Connect the allocated meeting room to the
conference.
Disconnect
Disconnect the allocated meeting room from
the conference.
Delete Delete the allocated meeting room.
Mute Audio
Mute the allocated meeting rooms so that the
audio of this meeting room will not be sent to
the conference.
Unmute Audio Unmute audio of the allocated meeting room.
To control a reserved conference:
1 Click Conference List .
2 Click Control .
3 Modify conference time, modify or add participants or meeting rooms
following the on-screen prompts.
Set the multi-screen layout
The user can modify the number of images of multiple sites spontaneously
displayed on the endpoint screen, also choose a preferred multi-screen layout
so that the conference site displays the participant’s image always according
to the layout selected here.
Multi-screen layout occupies more MCU video resource. When a multi-Screen
conference is held, the system codes/decodes several channels Of video streams with
different capabilities, and exports the video with quality at several grades. When an
endpoint joins the conference, the system will, in accordance with the various channels
of the video stream parameters (the video protocol, bandwidth, resolution and frame
rate defined by the user, appoint the endpoint to a video stream channel which can
match the endpoint’s highest capability, so as to optimize the conference video output.
The endpoint will access the conference in the pure audio mode when its parameters
defined for all the video streams. Default multi-screen layout is defined by the
conference profile used by The system. For more information about conference
profiles, please consult your system administrator.